We support our products for as long as you own them with FREE technical support by phone or email and free software upgrades as they become available. No maintenance contract required.
240228 Feb 28, 2024 | Security Vulnerability Announcements re: c_rehash script CVE-2022-1292 CVE-2022-2068 EndRun products are not vulnerable. |
As long as your unit is still under its current warranty then yes, you can purchase an extended warranty. ÌýContact EndRun Sales for information.
Yes - we will try. The problem may be that we no longer have parts for the oldÌýmodels.ÌýBut, if we can still get the needed parts thenÌýwe willÌýrepair your unit and charge for time and materials.
At EndRun, End-of-Life (EOL) means end of the production life cycle. We continue to provide free technicalÌýsupport (by phone or email) for as long as you own an EndRun product.Ìý In fact, we are still providing free support for products that we shipped in 2001.
Software upgrades for all our products are freely available for download from our website at:Ìýwww.endruntechnologies.com/support/software-upgrades.
Ìý
Current products (Sonoma, Meridian II, Tycho II, RTM3205) can be upgraded to the latest version of firmware straight from any older version. ÌýHowever, if you have modified either /etc/profile or /etc/rc.d/rc.MÌýand yourÌýLinux Root File System (RFS) is prior to version 2.20 then please contact Support (support@endruntechnologies.com).
Legacy products (Tempus LX, Unison, Meridian, Tycho, RTM3204) can also be upgraded to the latest version of firmware straight from any older version. ÌýHowever, if your RFS is prior to version 2.60 then please read this.
This string:
ÌýÌýÌýSonoma_D12 GPS 6010-0065-000 v 2.40 - Tue Sep 19 02:19:38 UTC 2017
which is displayed immediately after login simply means that firmware 6010-0065-000 version 2.40 was released on Tuesday September 16, 2017 at 02:19:38Ìý UTC. ÌýIt has nothing to do with current UTC.
Ìý
Yes.
No. To see a list of EndRun's product commands that you can easily use,Ìýtype:
ÌýÌýÌýhelp
To get help on a particular command type "help EndRun-command-name". For example:
ÌýÌýÌýhelp gpsstat
This will show you details regarding the gpsstat command.
Ìý
Ìý
Edit the file Ìý/etc/profileÌý and modify the definition of PS1.Ìý After making the change, copy the file to the non-volatile area:
ÌýÌýÌýcp /etc/profile /boot/etc
Serious vulnerabilities that cannot be mitigated with a reasonable workaround will be addressed with a new firmware update as soon as possible.Ìý For remaining vulnerabilities, please see Network Security Bulletins for mitigation steps.
Also, we recommend reading this: Best Practices to Secure Your Time Server.Ìý Taking the steps outlined in this paper will eliminate most, if not all, vulnerabilities.Ìý It was written for the Sonoma Time Servers but the same general steps apply to our other Linux-based products.
Yes.Ìý Follow these instructions:
1.ÌýÌýOpen theÌýsshd_configÌýfile for editing.
For current models (Sonoma, Meridian II, Tycho II, RTM3205) open this file:
ÌýÌýÌý/etc/ssh/sshd_config
For legacy models open this file:
ÌýÌýÌý/etc/sshd_config
2.ÌýÌýUncomment and edit the lines in sshd_config with ClientAliveInterval and ClientAliveCountMax settings as follows:
ÌýÌýÌýClientAliveInterval <session timeout in seconds>
ÌýÌýÌýClientAliveCountMax 0
3.ÌýÌýDon't forget to make the modified file persistent, by copying it to FLASH:
For current models (Sonoma, Meridian II, Tycho II, RTM3205):
ÌýÌýÌýcp -p /etc/ssh/sshd_config /boot/etc/ssh
For legacy models:
ÌýÌýÌýcp -p /etc/sshd_config /boot/etc/
4.ÌýÌýReboot the unit using this command:
ÌýÌýÌýreboot
Ìý
If you are uploading via SSH, do not use WinSCP!Ìý WinSCP does not work well with a raw flash partition.Ìý We have had great success using PuTTY's pscp utility, which is executed from the Windows command line and uses the same syntax as the Linux-based scp utility.Ìý You can download pscp from .
Ìý
You will need to configure a gateway for both the Ethernet ports.Ìý The user manual indicates that only one port can be configured with a default gateway (using the front panel or netconfig).Ìý However, with advanced routing you can configure a gateway for both ports (eth0 and eth1).Ìý You must add commands to set up static routes in theÌý/etc/rc.d/rc.MÌýstartup script. There is an easily spotted comment in the rc.MÌýfile showing where to add the commands.ÌýFor more information, read this Product NoteÌýor contact EndRun Technical Support.
Ìý
No.Ìý Products manufactured by Endrun Technologies are not affected because none of them include any version of Apache Log4j.